FULL AUTO WASHING MACHINE
Some of the symptomps that do not mean engine is damaged.
IF YOU USE THE WASHING MACHINE FOR THE FIRST TIME, WATER MAY FLOW FROM THE HOSE
This is only the remaining water from your washing machine inspection at the factory.
CONTROL PANEL BECOME HOT AT THE TIME OF OPERATION
This is because the electricity is hot.
PLAYERS ROTATE A LITTLE BIT
The players rotates a little bit because the laundry is not balanced.
LIGHTS FLICKER DURING WASHING AND RINSING
This is because the installation of power cable in the home. If the TL is replaced, this situation may be improved.
DURING THE DRYING PROCESS, THE WATER SUDDENLY BEGAN TO ENTER OR FLUSHING
Safety switch is activated because the laundry is not evenly distributed. Machine will start again after there is enough water and wash into the average.
THE SOUND OF WATER REMAINING IN THE WASHING MACHINE AFTER THE DRYING PROCESS IS COMPLETED
The sound of water is caused intentionally left in the engine to maintain balance and not due to engine damage.
DRYING WITHOUT ENOUGH ROTATION
The rotating speed of full auto washing machine is less than the rotating speed of twin tub washing machine. Sometime the rotating is hampered because there is a thick laundry, such as blanket.
AFTER STOPPING THE ENGINE IN THE PROCESS OF DRYING MACHINE DOES NOT START IMMEDIATELY
There is a short pause before the engine began to remove more waiting valve open disposal.
ENGINE WENT ON AND OFF DURING THE DRYING PROCESS
The sound of engine went on and off maybe can be hear during the drying process. This is the sound that happen for managing the rotation and not due to engine damage.
WATER THAT FLOWED MIXED WITH IRON RUST
Wait until the water becomes clear. Use bleach if rust is iron fleck white clothes. Do not use bleach for colored clothes.
ALARM (BUZZER) DOES NOT STOP
If CHILD PROOF program activated, and the cover is opened when the engine is running, the alarm sounds. Check the interior of washing machine. Turn off the POWER.
SEMI AUTO WASHING MACHINE
Before calling the service should check the following:
IF THE WASHING MACHINE DOES NOT WANT TO START
Check whether the electrical panel is installed properly?
Check whether the power, you have enough PLN/not?
Check that the electricity off?
IF EXCESSIVE SOUND ARISE
Check if an object exists in the tube when the engine rotates.
Check that the wash load is too excessive at the time of the process rinsing / spinning.